Hydro WorksHydro Works
PolyConnect 25mm Square Pipe 3m

DIY

PolyConnect 25mm Square Pipe 3m

In stock

R 150.00

  • 25 × 25 mm square PVC, in 3 m lengths
  • Push-in PolyConnect fittings: no welding or glue
  • Light, cuts at home, doesn't rust
  • White is UV-stabilised for outdoor frames

25 × 25 mm square PVC tubing in 3 m lengths, black or white. Cut it to size, push in PolyConnect 25 mm square fittings and build frames, stands, shelving and trellises without welding or glue.

Profile
Square, hollow
Size
25 × 25 mm
Length
3 m
Material
PVC (white is UV-stabilised)
All specifications

Choose a colour to request a quote.

Every order is confirmed by our team before payment — we check stock with suppliers (typically within 1–2 working hours) and send you a firm quote including delivery.

Questions about this product? WhatsApp us

Description

PolyConnect 25 mm square PVC tubing is a hollow, structural profile for building your own frames. It is light enough to carry and cut at home, it doesn't rust, and the square profile keeps shelves and stands square and stable. The white pipe is UV-stabilised for use outdoors.

The PolyConnect 25 mm square fittings push into the ends of the pipe, so a frame goes together by hand. Corners, T-joints, crosses, feet and end caps are all in the range.

Choosing a colour

White is UV-stabilised, so it is the one for outdoor frames and greenhouses, and it reflects light in a grow room. Black hides dirt and suits grow rooms, garages and workshops. Both take the same fittings.

How much pipe you need

Add up the length of every side of your frame and divide by 3 m, then plan your cuts so the offcuts are as short as possible. A 1 m cube, for example, has 12 sides of 1 m: four 3 m lengths, each cut into three, and eight 3-way corners (four packs of two).

What it's for

  • Stands for tanks and trays

    Stands for reservoirs, tanks and grow trays. The square profile keeps them square and stable.

  • Shelves and benches

    Seedling and propagation shelves, and benches and racks for the greenhouse, garage or grow room.

  • Covers and netting

    Frames for shade cloth, insect netting and plastic covers.

  • Trellises

    Trellises and supports for climbing plants.

How to use

  1. Plan the frame. Sketch it, mark every side with its length, and count the joints: each joint is one fitting.
  2. Measure and mark. The fittings sit inside the pipe, so the pipe length is close to the finished side length. Measure twice.
  3. Cut square. Use a fine-tooth hacksaw or a pipe cutter, with a mitre box if you have one. A square cut keeps the frame straight.
  4. Clean the ends. Take off the burr with a file or sandpaper so the fittings slide in fully.
  5. Assemble. Push the fittings in by hand. For a tight joint, tap them home with a rubber mallet.
  6. Finish. Fit end caps on open ends, and screw tee-brace feet to the floor or wall if the frame must not move.

Specifications

ProfileSquare, hollow
Size25 × 25 mm
Length3 m
MaterialPVC (white is UV-stabilised)
ColoursBlack, white
FittingsPolyConnect 25 mm square (push in)
Sold perLength
SKUHW-DIY-0093

Questions

Do I need glue or welding?

No. The PolyConnect 25 mm square fittings push into the ends of the pipe, so a frame goes together by hand. For a tight joint, tap them home with a rubber mallet.

Which colour should I use outdoors?

White. It is UV-stabilised, so it is the one for outdoor frames and greenhouses, and it reflects light in a grow room. Black hides dirt and suits grow rooms, garages and workshops. Both take the same fittings.

How do I cut it?

Use a fine-tooth hacksaw or a pipe cutter, with a mitre box if you have one, and cut square so the frame stays straight. Take the burr off with a file or sandpaper so the fittings slide in fully.

How much pipe do I need?

Add up the length of every side of your frame and divide by 3 m, then plan your cuts so the offcuts are as short as possible. A 1 m cube has 12 sides of 1 m: four 3 m lengths, each cut into three, and eight 3-way corners (four packs of two).

Which fittings are there?

Corners, T-joints, crosses, feet and end caps, all in the PolyConnect 25 mm square range.