

Meters/Calibration
Bluelab pH Pen
In stockR 2,350.00
Bluelab pH Pen: a waterproof handheld pH meter that reads pH 0.0 to 14.0 and temperature, with automatic temperature compensation, two-point calibration and a backlit display. For hydroponic, coco and soil growers.
- pH range
- 0.0 to 14.0 (resolution 0.1)
- pH accuracy
- ±0.1 at 25 °C
- Temperature range
- 0 to 50 °C (accuracy ±1 °C)
- Calibration
- Two-point, pH 7.0 and pH 4.0, 30-day reminder
Every order is confirmed by our team before payment — we check stock with suppliers (typically within 1–2 working hours) and send you a firm quote including delivery.
Questions about this product? WhatsApp usDescription
The Bluelab pH Pen is a compact pH meter for checking your nutrient solution, reservoir or runoff. It reads pH from 0.0 to 14.0 to ±0.1, and shows the solution temperature in °C or °F. Readings are fully temperature compensated.
Plants can only take up nutrients properly within the right pH range. If the pH drifts, nutrients can lock out even when the feed is correct, so a reliable pH meter is one of the first tools a hydroponic grower needs.
Features
- pH and temperature in one pen.
- Two-point calibration with pH 7.0 and pH 4.0 solutions, and a 30-day reminder so you don't forget.
- Double-junction pH probe.
- Waterproof and floats.
- Backlit display, easy to read in a dim grow room.
- Runs on one AAA battery.
What's in the box
The pen, one 18 ml sachet each of pH 7.0 and pH 4.0 calibration solution, and Bluelab KCl storage solution.
Looking after the probe
The probe on this model is not replaceable, so care matters. Keep the tip wet with KCl storage solution, never let it dry out, and calibrate regularly with pH 7.0 and pH 4.0 solution. For EC, pair it with the Bluelab Conductivity Pen.
How to use
- Remove the cap, rinse the probe and switch the pen on.
- Dip the probe into the solution and stir gently.
- Wait for the reading to settle, then read pH and temperature.
- Rinse and store wet. Rinse in clean water, add a few drops of KCl storage solution to the cap and replace it.
- Calibrate at pH 7.0 then pH 4.0 when the 30-day reminder shows, following the Bluelab instructions.
Specifications
| pH range | 0.0 to 14.0 (resolution 0.1) |
|---|---|
| pH accuracy | ±0.1 at 25 °C |
| Temperature range | 0 to 50 °C (accuracy ±1 °C) |
| Calibration | Two-point, pH 7.0 and pH 4.0, 30-day reminder |
| Probe | Double junction, not replaceable |
| Power | 1 × AAA alkaline battery |
| Water resistance | Waterproof, floats |
| Operating conditions | Solutions of 0.2 EC and above |
| Warranty | 1-year limited (Bluelab) |
| SKU | HW-MET-0360 |
Safety and warnings
- Bluelab says not to use or store the pen outside 0 to 50 °C.
- Don't let the probe dry out.
- The pen is designed for solutions of 0.2 EC and above; readings in very pure water (such as RO water) may not be reliable.




